BLMLX - LUBRIMATIC, 11546

  • MSDS: BLMLX
  • Manufacturer: WITCO CORP
  • Product Name: LUBRIMATIC, 11546
  • National Stock Number: 9150-00N021489
Product Identification

Product ID:LUBRIMATIC, 11546
MSDS Date:07/16/1990
FSC:9150
NIIN:00N021489
MSDS Number: BLMLX

Responsible Party
WITCO CORP
1400 S HARRISON
OLATHE, KS 66061
US

Emergency Phone: 913-782-5800 800-424-9300(CHEMTREC)

Info Phone: 913-782-5800

Preparer: RAY D LAWSON

Cage: WITCO

Contractor
WITCO CORP
5446 DALLAS, TX 75284-0075 US

Telephone: 504-738-1623

Cage: WITCO

Ingredients

PETROLEUM HYDROCARBON PLUS ADDITIVES

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE WHEN USED WITH GOOD PERSONAL
HYGIENE PRACTICES. MAY OTHERWISE CAUSE SKIN AND EYE IRRITATION UPON
PROLONGED OR REPEATED CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: IMMEDIATELY FLUSH WITH LARGE QUANTITIES OF WATER FOR AT
LEAST 15 MIN AND CALL A PHYSICIAN. SKIN: REMOVE EXCESS WITH CLOTH
OR PAPER. WASH THOROUGHLY WITH SOAP AND WATER. INHAL: REMOVE VICTIM
TO F RESH AIR. INGEST: CONTACT A PHYSICIAN IMMEDIATELY.

Fire Fighting

Flash Point Method:COC
Flash Point:180F,82C
Extinguishing Media:DRY CHEMICAL OR WATER FOG OR CO2 OR FOAM OR SAND/
EARTH. CLOSED CONTAINERS EXPOSED TO FIRE MAY BE COOLED WITH WATER.
Fire Fighting Procedures:DENSE SMOKE. FIRE FIGHTERS SHOULD WEAR
NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DENSE SMOKE.

Accidental Release

Spill Release Procedures:TRNASFER BULK OF MIXTURE INTO ANOTHER
CONTAINER. ABSORB RESIDUE WITH AN INERT MATERIAL SUCH AS EARTH,
SAND, OR VERMICULITE. SWEEP UP AND DISPOSE AS SOLID WASTE IN
ACCORDANCE WITH LOCAL, STATE, AND FED ERAL REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED UNTIL READY FOR
USE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN!!! OBSERVE A TWA/PEL OF
5 MG/M3 FOR MINERAL OIL MIST.

Exposure Controls

Respiratory Protection:NONE. NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Ventilation:NONE.
Protective Gloves:NONE
Eye Protection:CHEM WORK GOG/FULL LENGTH FSHLD .
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V4
Spec Gravity:0.897
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER OIL, MINERAL OIL ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO AND CO2 DURING BURNING, POX FROM
BURNING. SOX, NOX, ALDEHYDES, KETONES.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.